Home > Solar PV Pumping System > YHP22K(30HP) AC Solar PV Pump(6_and 8_pump)
YHP22K(30HP) AC Solar PV Pump(6_and 8_pump)
System Parameter | |
System head | 244m(Max.) |
Daily flow | 500m3(Max.) |
Input voltage | 450-750V |
Max. input open circuit voltage | 800V |
Inverter Power | 22000W(Output AC 3P 380V) |
Output current | 45A |
Pump power | 22000W(Input AC 3P 380V) |
PH range of water quality | 6.5-8.0 |
Operating temperature | -20℃~+50℃ |
Protection Grade | IP54 |
* Product contains combiner and special PV lightning protection modules. |
Head |
Flow |
Outlet Dia. |
244 |
9 |
76 |
190 |
17 |
76 |
140 |
24 |
76 |
107 |
30 |
76 |
70 |
50 |
76 |
48 |
77 |
76 |
36 |
98 |
100 |
- Recommended head, flow data for maximum power
- ** Maximum power standard test conditions (solar radiation):6 kwh / square meter / day, environment temperature is 25°C
Inverter controller:
1. setting parameter automatic / manual ;
2. The application of various three-phase ;
3. asynchronous motor ;
4. High conversion efficiency, MPPT control ;
5. Lightning protection, combiner, under voltage ;
6. and over current protection .
Pump:
7. High efficiency three-phase AC Pumps(380V);
8. Protect check valve;
9. Stainless steel material;
10. Protection grade:IP68;
Features:
11. Simple installation,do not need to set up power grid;
12. Full automatic operation , withoutmanual operation;
13. Low investment cost, quick return of cycle. Low carbon, energy saving;
14. Optional water level detection accessories(To prevent the motoranhydrous idling and water of tower overflow ).
15. Technological innovation, realizing agricultural modernization
Application: